Smeg CWG420D Manual page 16

‐ CW 420/430
Quantity of rinse aid dispensed (if featured), the number
indicates the seconds of peristaltic pump operation)
Start‐on/start‐off
Set at "on" to start the cycle when the door is closed.
Set at "off" for cycle start after confirmation with the start
button
Water hardness setting (if featured), on models with
softener only
tStP on/off "on" = minimum rinsing temperature as set,
regardless of intake water temperature.
If the intake water is not hot; the cycle duration might be a
few seconds longer than the nominal timing, "off" = the
minimum rinsing temperature might be a few degrees
lower than the setting
Rinse aid pump total operating minutes display. (if
featured)
This value can be reset during pump maintenance ‐ see
below.
Detergent pump total operating minutes display. (if
featured)
This value can be reset during pump maintenance ‐ see
below.
16