Table of Contents
Advertisement
8.1 Control panel
On-off button
Total emptying button (tank and boiler)
Regeneration key (only if softener is fitted)
L1 power on LED
L2 pump-out in progress LED
L3 generation in progress LED
L4 no salt LED (only if softener is installed)
Short cycle key
Medium cycle key
Long cycle key
L5 power on LED
L6 power on LED
L7 power on LED
8.2 Before washing
Use only detergents and rinse aids for industrial dishwashers.
Do not use detergents intended for hand washing.
We recommend the use of Smeg products, specially developed for this dishwasher.
When topping up the tanks, take care not to swap the products; this might damage the dishwasher and
cause malfunctions.
Do not mix different detergents; this would damage the dispenser device.
Industrial dishwasher detergents may cause serious irritations. Comply carefully with the instructions provided by
the detergent producer on the pack.
Turn on the
mains water
The level of
tap (user)
detergent and
rinse aid in the
containers.
8 INSTRUCTIONS FOR THE USER
R
Check:
That there is
regenerating salt in
the relative
container (if fitted).
8.8.
That the filters are in place,
the spray arms rotate, and
there are no foreign bodies
in the dishwasher.
14
Switch on the master
switch (user): the
word "OFF" appears
on the display.
Advertisement
Table of Contents
