Table of Contents
Advertisement
Supply voltage
Frequency
Max. power absorption at 400V 3N ~
Boiler heating element power at 400V 3N ~
Tank heating element power
Water intake pressure
Water intake temperature
Water hardness
Rinse cycle water consumption
Boiler capacity
Tank capacity
Standard cycle duration with intake water at 50°C
Degree of protection
Net weight
Power supply cable type
Fuse
400V 3N ~
C
5 x 4
10,8 kW
INSTALLATION and POSITIONING
Bring the dishwasher to the installation site, remove the packaging and check the appliance and components
for damage; any damage found must be reported to the transporter in writing.
The packaging components (plastic bags, expanded polystyrene, nails, etc.) must not be left within reach of
children and pets since they are potentially dangerous.
All packaging materials used are environment-friendly. They can be kept without constituting any hazard, or
may be disposed of at a specialist waste disposal centre.
The plastic components suitable for recycling are marked as follows:
PE polyethylene: external packaging film, bag containing the instructions, protective bags.
PP polypropylene: straps.
PS expanded polystyrene: corner guards, top of packaging.
Wooden and cardboard components can be disposed of in accordance with the relevant regulations.
When the product is decommissioned it must not be dumped in the environment; it must be disposed of in
accordance with the relevant regulations. All metal parts are in stainless steel and can be removed.
The plastic parts are marked with the symbol identifying the material used.
POSITIONING:
Caution: the indoor system and premises in which equipment for institutions is installed must
comply with the relevant regulations.
The manufacturer declines all liability for direct or indirect injury or damage deriving from failure to comply
with these regulations.
Before installation, check that there are no objects or materials in the vicinity which may be damaged by
steam or splashes of washing solution, or that any such items are suitably protected.
Place the dishwasher in the chosen point and remove the protective film.
Level the dishwasher (with the aid of a spirit level) on its adjustable feet to ensure that it is stable; all other
mounting solutions must be approved by the manufacturer.
The dishwasher must be secured to the adjoining work-tops by means of suitable fixtures.
3
2
Technical data
TECHNICAL DATA
S
32A
3 Installation and positioning
V
Hz
kW
kW
kW
kPa (bar)
°C
°dF
I
I
I
s
IPX
kg
◄HAR►
A
C = Power Supply Cable. S = Master Switch
400V 3N ~
50
10.8
9.0
1.8
100-600 (1 ÷ 6)
15°C – 60°C
< 15°dF
3.2
10
22
60/90/150/variable
5
120
H07RN-F
4
Advertisement
Table of Contents
