Antennas; Removing The Antennas - Dell Inspiron 24 5430 All-in-One Owner's Manual

Antennas

Removing the antennas

CAUTION: The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the back cover.
4. Remove the I/O cover.
5. Remove the system-board
6. Remove the media-card
7. Remove the memory module.
8. Remove the wireless card.
9. Remove the M.2 2230 solid-state
10. Remove the integrated heat sink
11. Remove the system board.
12. Remove the speakers.
13. Remove the stand hinges.
14. Remove the power-button board with
About this task
The following image indicates the location of the antennas and provides a visual representation of the removal procedure.
Figure 58. Removing the antennas
Steps
1. Remove the antenna cables from the routing guides on the display-assembly base.
NOTE: Make a note of the cable routing before removing the them form the routing guides.
Before working inside your
shield.
reader.
drive.
or discrete heat
USB.
computer.
sink, as applicable.
Removing and installing Field Replaceable Units (FRUs) 85