Antenna; Removing The Antennas - Dell XPS 17 9700 Service Manual

Hide thumbs Also See for XPS 17 9700:
Table of Contents

Advertisement

17. Replace the two screws (M2x4) that secure the display-cable bracket to the palm-rest and keyboard assembly.
NOTE:
Apply sufficient torque when tightening the two screws (M2x4) to avoid damaging the screw threads.
Next steps
1. Install the
display
assembly.
2. Install the
I/O
board.
3. Install the
right
fan.
4. Install the
left
fan.
5. Install the
heat
sink.
6. Install the
M.2 2230 solid-state drive
7. Install the
M.2 2230 solid-state drive
8. Install the
memory
modules.
9. Install the battery.
10. Install the
base
cover.
11. Follow the procedure in

Antenna

Removing the antennas

Prerequisites
1. Follow the procedure in
NOTE:
The Service Tag of your computer is stored in the system board. Enter the Service Tag in the BIOS setup
program after you replace the system board.
NOTE:
Replacing the system board removes any changes that you have made to the BIOS using the BIOS setup
program. Make the appropriate changes again after you replace the system board.
NOTE:
Before disconnecting the cables from the system board, note the location of the connectors so that you can
reconnect the cables correctly after you replace the system board.
2. Remove the
base
cover.
3. Remove the battery.
4. Remove the
memory
modules.
5. Remove the
M.2 2230 solid-state drive
6. Remove the
M.2 2230 solid-state drive
7. Remove the
heat
sink.
NOTE:
The system board can be removed or installed together with the heat sink attached. This simplifies the
procedure and avoids breaking the thermal bond between the system board and the heat sink.
8. Remove the
right
fan.
9. Remove the
left
fan.
10. Remove the
I/O
board.
11. Remove the
display
assembly.
12. Remove the
system
board.
About this task
The following image indicates the location of the antennas and provides a visual representation of the removal procedure.
46
Removing and installing components
or the
M.2 2280 solid-state drive
or the
M.2 2280 solid-state drive
After working inside your
computer.
Before working inside your
or the
M.2 2280 solid-state drive
or the
M.2 2280 solid-state drive
in the SSD2 slot.
in the SSD1 slot.
computer.
from the SSD1 slot.
from the SSD2 slot.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents