Table of Contents
Advertisement
Figure 65. Installing the middle-frame assembly
Steps
Place the middle-frame assembly on a flat and clean surface and perform the steps in the
middle-frame assembly.
NOTE:
The middle-frame assembly consists of the following:
● Middle frame
● Base panel
● Wireless antenna
Next steps
1. Install the
display
panel.
2. Install the
power-button board with
3. Install the
stand
hinges.
4. Install the microphones.
5. Install the speakers.
6. Install the
system
board.
7. Install the
integrated heat sink
8. Install the
M.2 2230 solid-state
9. Install the
wireless
card.
10. Install the
memory
module.
11. Install the
retractable-camera
12. Install the fan.
13. Install the
media-card
14. Install the
system-board
15. Install the
I/O
cover.
16. Install the
back
cover.
17. Install the stand.
18. Follow the procedure in
USB.
or,
discrete heat
drive.
assembly.
reader.
shield.
After working inside your
sink, as applicable.
computer.
Removing and installing Field Replaceable Units (FRUs)
Post-requisites
to install the
93
Advertisement
Table of Contents
