Dell Inspiron 24 5430 All-in-One Owner's Manual page 105

Table 38. System setup options—System Management menu (continued)
System Management
Power-on-Self-Test Automatic
Recovery
Power-on-Self-Test Automatic Recovery
Table 39. System setup options—Keyboard menu
Keyboard
Keyboard Errors
Enable Keyboard Error Detection
Numlock LED
Enable Numlock LED
Table 40. System setup options—Preboot Behavior menu
Preboot Behavior
Adapter Warnings
Enable Dock Warning Messages
Warnings and Errors
Fastboot
Extend BIOS POST Time
Table 41. System setup options—Virtualization menu
Virtualization Support
Intel Virtualization Technology
Enable Intel Virtualization Technology (VT)
VT for Direct I/O
By default, this option is enabled.
This option enables or disables the BIOS to attempt an automatic recovery of the
computer- such as reverting BIOS Setup configuration settings to BIOS.
By default, this option is enabled.
Enables or disables report of keyboard-related errors when the computer boots.
By default, this option is enabled.
Enables or disables Numlock when the computer boots.
By default, this option is enabled.
Enables the warning messages during boot when the adapters with less power
capacity are detected.
By default, the Enable Dock Warning Messages option is enabled.
Enables or disables the action to be taken when a warning or error is
encountered.
By default, the Prompt on Warnings and Errors option is selected. Stop,
prompt, and wait for user input when warnings or errors are detected.
NOTE: Errors deemed critical to the operation of the computer hardware
stop the functioning of the computer.
Allows you to configure the speed of the UEFI boot process.
By default, the Thorough option is selected. Performs complete hardware and
configuration initialization during boot.
Sets the BIOS POST (Power-On Self-Test) load time.
By default, the 0 seconds option is selected.
When enabled, the computer can run a Virtual Machine Monitor (VMM).
By default, the Enable Intel Virtualization Technology (VT) option is enabled.
BIOS Setup 105