Dell Inspiron 24 5430 All-in-One Owner's Manual page 99

Table 31. System setup options—Storage menu (continued)
Storage
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART reporting
Enable SMART reporting
Drive information
Table 32. System setup options—Display menu
Display
Touchscreen
OSD Button Management
Disable OSD buttons
Full Screen Logo
Table 33. System setup options—Connection menu
Connection
Network COntroller Configuration
Integrated NIC
Wireless Device Enable
WLAN
Bluetooth
Enable UEFI Network Stack
HTTP(s) Boot Feature
HTTP(s) Boot
Sets the operating mode of the integrated SATA hard drive controller.
By default, the RAID On option is selected.
Displays the information of various onboard drives.
Enables or disables the M.2 PCIe SSD option.
By default, the M.2 PCIe SSD option is enabled.
If S.M.A.R.T. (Self-monitoring, Analysis, and Reporting Technology) is enabled
the BIOS can receive analytical information from integrated devices and send
notifications during startup about possible failure of the device.
By default, the option is disabled.
Displays the drive type and device name.
Enables or disables the touch screen option.
By default, the Touchscreen option is enabled.
Disable the OSD (On-Screen Display) buttons on their All-in-One system.
By default, the option is disabled.
Enables or disables the computer to display a full-screen logo, if the image
matches screen resolution.
By default, the Full Screen Logo option is disabled.
Sets the on-board LAN controller.
By default, the Enabled with PXE option is selected.
Enables or disables the internal WLAN device.
By default, the WLAN option is enabled.
Enables or disables the internal Bluetooth device.
By default, the Bluetooth option is enabled.
Enables or disables the UEFI Network Stack and controls the onboard LAN
Controller.
By default, the Auto Enabled option is selected.
Enables or disables the HTTP(s) boot capabilities.
By default, the option is eabled.
BIOS Setup 99