Dell Inspiron 24 5430 All-in-One Owner's Manual page 84

Figure 57. Installing the microphones
Steps
1. Align and place the microphone module into the slot on the display-assembly base.
2. Replace the four screws (M2X3.5) that secure the microphone module to the display-assembly base.
3. Route the microphone cable through the routing guides on the display-assembly base.
4. Adhere the tape that secures the microphone cable to the display-assembly base.
Next steps
1. Install the system board.
2. Install the integrated heat sink
3. Install the M.2 2230 solid-state
4. Install the wireless card.
5. Install the memory module.
6. Install the media-card
7. Install the system-board
8. Install the I/O cover.
9. Install the back cover.
10. Install the stand.
11. Follow the procedure in
84 Removing and installing Field Replaceable Units (FRUs)
or, discrete heat
drive.
reader.
shield.
After working inside your
sink, as applicable.
computer.