Table of Contents
Advertisement
9. Install the
media-card
10. Install the
system-board
11. Install the
I/O
cover.
12. Install the
back
cover.
13. Install the stand.
14. Follow the procedure in
Display panel
Removing the display panel
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the stand.
3. Remove the
back
cover.
4. Remove the
I/O
cover.
5. Remove the
system-board
6. Remove the
media-card
7. Remove the
wireless
card.
8. Remove the
M.2 2230 solid-state
9. Remove the
integrated heat sink
10. Remove the
system
board.
About this task
The following image indicates the location of the display panel and provides a visual representation of the removal procedure.
reader.
shield.
After working inside your
Before working inside your
shield.
reader.
drive.
or
discrete heat
computer.
computer.
sink, as applicable.
Removing and installing Field Replaceable Units (FRUs)
87
Advertisement
Table of Contents
