Table of Contents
Advertisement
84
Parameter
Description
System Sleep
This parameter sets the system to the
Timer
lowest power-saving mode after a
specified period of inactivity. Any
keyboard or mouse action or any activity
detected from the IRQ channels resumes
system operation.
Sleep Mode
Lets you specify the power-saving mode
that the system will enter after a specified
period of inactivity.
This parameter becomes configurable only
if the System Sleep Timer is on. Any
keyboard or mouse action, or any enabled
monitored activities occurring through the
IRQ channels resume system operation.
Power Switch
When set to Power off, the system
< 4 sec.
automatically turns off when the power
switch is pressed for less than 4 seconds.
When set to Suspend, the system enters
the suspend mode when the power switch
is pressed for less than 4 seconds.
System Wake-
The system wake-up event allows the
up Event
system to resume operation when the
modem ring indicator is enabled.
Modem ring
When Enabled, any fax/modem activity
indicator
wakes up the system from suspend mode.
PCI Power
Enables or disabled the PCI power
Management
managment function
RTC Alarm
Allows you to set a certain time on a
certain day to wake-up your system from
suspend mode.
Resume Day
If RTC alarm is enabled, the system will
resume operation on the day indicated
here.
Resume Time
If RTC alarm is enabled, the system will
resume operation at the time indicated
here.
Download from Www.Somanuals.com. All Manuals Search And Download.
4 BIOS Setup utility
Option
Off
On
Standby
Suspend
Power off
Suspend
Enabled
Disabled
Enabled
Disabled
Disabled
Enabled
User input
User input
Advertisement
Table of Contents
