Table of Contents
Advertisement
Parameter
Description
Console
This parameter lets you enable or disable
Redirection
the connection to the RDM manager
station. If enabled and conditions are met,
the RDM-enabled server automatically
dials the RDM manager station using the
phone number specified in the Remote
Console Phone No. parameter when the
server reboots. Once the connection is
established, both the RDM server and RDM
manager station display the same screen
which enables the RDM manager station to
function the same as the server console.
Setting this to Disabled deactivates the
RDM manager station.
Hidden
If you want the hidden partition to
Partition
become accessible, set this parameter to
Enabled. When enabled, the server boots
to the hidden partition.
Communication
This parameter specifies the parity, stop
Protocol
bits, and data length for the COM port to
be used for the RDM connection. This is
fixed at N(none), 8, 1 setting and is non-
configurable
COM Port Baud
This parameter lets you set the transfer
Rate
rate of the COM for the RDM connection.
The parameter setting depends on your
modem specification; therefore, before
you change the setting of this parameter,
check the documentation that came with
your modem.
Download from Www.Somanuals.com. All Manuals Search And Download.
97
Option
Disabled
Enabled
Disabled
Enabled
N
8
1
9600
57600
Advertisement
Table of Contents
