Table of Contents
Advertisement
134
h
Slide the roller towards the lock.
i
Adjust the inner sliding rail until you can see the screw holes.
j
Attach the mounting bracket to the front end of the
mounting rail and align the screw holes. Secure it with two
M4 x L8 screws with nut and washer.
k
Slide and adjust the inner sliding rail again to see the third
screw hole. Secure it with one M4 x L8 screw with nut and
washer. The position of the mounting bracket on this end is
fixed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix B: System rack installation guide
Advertisement
Table of Contents
