Table of Contents
Advertisement
Parameter
Description
Onboard SCSI
Allows you to manually assign the
interrupt for the onboard SCSI when the
PCI IRQ Setting parameter is set to Manual.
This parameter is grayed and not user-
configurable when the PCI IRQ Setting is
set to Auto.
Onboard LAN
When you set the PCI IRQ Setting
parameter to Auto, this parameter
specifies the auto-assigned interrupt for
the onboard LAN. If you set the PCI IRQ
Setting parameter to Manual, you need to
specify the interrupt that you want to
assign for the onboard LAN installed in
your system.
PCI IRQ
Setting this parameter to Yes allows you to
Sharing
assign the same IRQ to two different
devices. To disable the feature, select No.
Note: If there are no IRQs available to
assign for the remaining device function, it
is recommended that you enable this
parameter.
VGA Palette
This parameter permits you to use the
Snoop
palette snooping feature if you installed
more than one VGA card in the system.
The VGA palette snoop function allows the
control palette register (CPR) to manage
and update the VGA RAMDAC (Digital
Analog Converter, a color data storage) of
each VGA card installed in the system. The
snooping process lets the CPR send a signal
to all the VGA cards so that they can
update their individual RAMDACs. The
signal goes through the cards continuously
until all RAMDAC data has been updated.
This allows the display of multiple images
on the screen.
Note: Some VGA cards require specific
settings for this feature. Check your VGA
card documentation before setting this
parameter.
Download from Www.Somanuals.com. All Manuals Search And Download.
103
Option
User input
User input
Yes
No
Disabled
Enabled
Advertisement
Table of Contents
