Residual Risks; Ec Declaration Of Conformity - Nilfisk-Advance VHC110 Instructions For Use Manual

VHC110 - VHC120
Version for liquids.
If foam or liquid leaks out of the machine, turn it off
immediately and contact qualified personnel for
assistance.
These devices must not be used in corrosive environment.

Residual Risks

After carefully considering the risks that are present in all
machine operating phases, necessary measures were adopted
in order to eliminate the risks for the operators, as far as
possible, and/or limit or reduce the risks deriving from hazards
that cannot be completely eliminated at the source.
During operations
exposed to certain residual risks which, due to the nature of
the operations themselves, cannot be completely eliminated.
Therefore the installer is responsible for providing additional
information and/or hazard signals based on the location of
machine installation and the material that is handled.

EC Declaration of conformity

Every machine comes with a EC Declaration of conformity. See
fac-simile in fig. 17.
The Declaration of conformity is an important document
and should be kept in a safe place to be presented to the
Authorities on request.
IT
GB
F
D
E
C447
CAUTION!
[ NOTE ]
and/or maintenance, operators
[ NOTE ]
are
4