Nilfisk-Advance VHC200 Instruction Manual
Hide thumbs
Also See for VHC200:
- Instruction manual (72 pages) ,
- Instructions for use manual (21 pages) ,
- Instructions for use manual (102 pages)
Subscribe to Our Youtube Channel
Related Manuals for Nilfisk-Advance VHC200
Summary of Contents for Nilfisk-Advance VHC200
- Page 1 VHC200 VHC200EXP INSTRUCTIONS MANUAL MANUEL D’INSTRUCTIONS MANUAL DE INSTRUCCIONES C385-I-GB-F-D-E 04/2012...
-
Page 3: Table Of Contents
VHC200 / VHC200EXP Translation of the original instructions Table of contents Instructions for use ......................2 Operator’s safety ..........................2 General information for using the vacuum cleaner ................2 Proper uses ............................. 2 Improper Use ........................... 3 Versions and variations ........................3 EC Declaration of conformity ...................... -
Page 4: Instructions For Use
VHC200 / VHC200EXP Instructions for use Read the operating instructions and comply with the important safety recommendations identified by the word WARNING! Operator’s safety General information for using the vacuum cleaner WARNING! Use the vacuum cleaner in accordance with the laws in force Before starting the vacuum cleaner, it is in the country where it is used. -
Page 5: Improper Use
Explosive dust/substances and/or ones liable to ignite in a spontaneous way (such as Warning: Do not use this or any other Nilfisk CFM vacuum magnesium or aluminium dusts, etc.). for the purposes of cleaning or extracting fuel residues from IMPORTANT: Fraudulent use is not admitted. -
Page 6: Vacuum Cleaner Description
VHC200 / VHC200EXP Vacuum cleaner description Vacuum Cleaner Parts and Labels Optional kits Figure 1 Please contact the manufacturer’s sales network for information on optionals. Identification plate which includes: Model Code, Technical Specifications (see table on page Instructions for installing the optional are included in the 7), Serial no. -
Page 7: Unpacking, Moving, Use And Storage
VHC200 / VHC200EXP Unpacking, moving, use and storage Tool and Attachments Operate on flat, horizontal surfaces. Warning: The VHC200EXP is only intended for explosion-proof/dust ignition-proof operation if it is The load-bearing capacity of the surface the vacuum cleaner equipped with the proper conductive hose and tools. -
Page 8: Wet And Dry Applications
VHC200 / VHC200EXP Wet and dry applications Maintenance and repairs [ NOTE ] WARNING! The supplied filters and the bag (if applicable) must be Disconnect the vacuum cleaner from its power installed correctly. source before cleaning, servicing, replacing parts or converting it to obtain another version/variant. -
Page 9: Technical Specifications
VHC200 / VHC200EXP Technical specifications VHC200 / VHC200EXP Parameter Units Recommended air compressor size 18-23 Recommended air pressure Max. waterlift in. H Maximum air flow rate (with hose, length: 3 m, diameter: 70 mm) Noise level (Lpf) (EN60335-2-69) dB(A) Inlet (diameter) -
Page 10: Inspections Prior To Starting
HEPA filter. Be sure to install the HEPA filter WARNING! according to Nilfisk CFM’s written instructions. Do not use this cleaner for the removal of hazardous substances unless Consult the “Troubleshooting” chapter if faults occur. -
Page 11: Primary Filter Shaker
Plastic disposal bags (Figure 6) can be used as an alternate and suitable protection for personnel. means of collection. Additional equipment must be added to this machine in order to use the plastic bags. Contact Nilfisk CFM to order the necessary equipment. Liquids vacuuming... -
Page 12: Primary And Absolute Filter Disassembly And Replacement
VHC200 / VHC200EXP Primary and HEPA filter disassembly and HEPA filter assembly or replacement replacement WARNING! WARNING! Do not attempt to clean the HEPA filter. Replace the filter in necessary. When the vacuum cleaner is used to vacuum hazardous substances, the filters become... -
Page 13: Periodic Inspection
VHC200 / VHC200EXP Periodic inspection Hoses check Make sure the connecting hoses (Fig. 9) are in a good condition and attached correctly. If the hoses are damaged, broken or poorly connected, they must be replaced. When sticky materials are collected, check for possible clogging along the hose, in the inlet and on the baffle plate inside the filtering chamber. -
Page 14: Troubleshooting
VHC200 / VHC200EXP Troubleshooting Problem Cause Remedy Shake the filter. Clogged primary filter Replace it if necessary The vacuum cleaner suddenly stops Clogged vacuum hose Check and clean the air intake Increase air supply pressure. Check the pressure Insufficient airflow supplied by the pneumatic network is sufficient. -
Page 15: Warranty
Warranty Nilfisk warrants that its equipment will be free of defects in workmanship or material for a period of two years from the date of delivery. If the vacuum fails to meet these warranty standards , Nilfisk shall, upon notification within such time period, correct such non-conformity, at its option, either by repairing any defective part or parts, or by replacing a part or parts provided that the equipment is returned to an authorized Nilfisk service facility. - Page 16 VHC200 13 A 07AJ814 3000 W Kg 71 Ref.No: 4010300258 50/60 Hz ME77 04/2012 C385...
- Page 17 VHC200 C385 04/2012...
- Page 18 VHC200 04/2012 C385...
- Page 19 VHC200 C385 04/2012...
- Page 20 VHC200 04/2012 C385...
- Page 21 Harmonized Regulation Applied EN ISO 12100-1, EN ISO 12100-2, EN 60335-2-69 Soggetta alla Direzione e Coordinamento di Nilfisk-Advance A/S in ottemperanza al nuovo art. 2497 bis. cc. Responsible for the technical file according to 2006/42/EC: Nilfisk-CFM SpA Capitale sociale € 1.806.000 - REA n° LO 1399281 - Reg. Imprese di Milano n° 0122068093...
Need help?
Do you have a question about the VHC200 and is the answer not in the manual?
Questions and answers