Stiga G 300 Instruction Manual page 55

BAN:
To avoid irreversible damage to the electrical and electronic components, do not
immerse the robot lawn mower, partially or completely, in water.
BAN:
Do not wash the internal parts of the robot lawn mower to avoid damaging the
electrical and electronic components.
BAN:
Do not use solvents or petrol so as not to damage varnished surfaces and
plastic parts.
5. Remove mud and dirt from the drive wheels (F).
6. Clean the underside (E) of the robot lawn mower (cutting blade area, front and rear wheels). Use a
suitable brush to remove encrustations and / or debris that could prevent the robot lawn mower from
working properly. Complete the cleaning with a damp sponge.
7. Put the floating cover (D) back on, making sure that it is correctly fastened to the supports.
8. Clean the battery charging connector (G).
9. Clean the charging base (H) and the contact connector (I) from accumulated residues.
F
EN
E
G
H I
6. MAINTENANCE
51