Unpacking - Stiga G 300 Instruction Manual

• Installation kit (Optional for G 600. G 1200 and G 3600)
(F) Perimeter cable
(G) Perimeter cable fixing pegs
(H) joint for perimeter cable
(I) charging base connectors
See Chapter 9 "Accessories"
3.3.

UNPACKING

Following are listed all the steps to perform the correct unpacking:
1. Open the box of the robot lawn mower;
2. Take out the " Starter Kit" box;
3. Take out the upper containment carton;
4. Take out the robot lawn mower;
5. Take out the charging base.
WARNING:
Make sure to remove all packaging material from the robot lawn mower before
using it.
WARNING:
To avoid injury or damage, please be careful when unpacking the robot lawn
mower, avoiding contact with cutting blades or other hazardous elements.
1
12
3. INTRODUCTION
F
2
4
H
G
I
3
5
EN