Installation Of The Perimeter Cable; Components Installation - Stiga G 300 Instruction Manual

4.5.

COMPONENTS INSTALLATION

ELECTRICAL HAZARD:
Only use the battery charger
and power supply provided by
the manufacturer. Improper use
may cause electric shock and\or
overheating.
ELECTRICAL HAZARD:
A socket must have been
prepared near the installation
area to connect it to electricity.
Make sure that connection
to the power supply network
conforms to laws in force of the
Country where it is used.

4.5.1. INSTALLATION OF THE PERIMETER CABLE

MAXIMUM LENGTH OF
PERIMETER CABLE
< 400m
>= 400m up to max. 1000m
POSITIONING WITH PEGS
CAUTION:
Danger of cutting hands.
Requirements and obligations:
• Low grass all the way
• Perimeter cable
• Fixing pegs
• Joints for perimeter cable
• Pliers
GLOVES OBLIGATION:
Use protective gloves to avoid
cutting your hands.
26
4. INSTALLATION
STIGA CABLES COMPATIBLE WITH THE INSTALLATION
Code 1127-0000-01
Code 1127-0001-01
Code 1127-0002-01
Code 1127-0003-01
Code 1127-0002-01
Code 1127-0003-01
• Hammer
• Gloves
• Glasses
• Electrician's scissors
CAUTION:
The circuit provided must be
protected by a residual current
device (RCD) with an activation
current not exceeding 30 mA.
ELECTRICAL HAZARD:
Connect the power supply only
at the end of all the installation
operations. If necessary during
the installation, turn off the
general power supply.
Reel 150 m, Ø 2.7 mm
Reel 300 m, Ø 2.7 mm
Reel 500 m, Ø 3.4 mm
Reel 1000 m, Ø 3.4 mm
Reel 500 m, Ø 3.4 mm
Reel 1000 m, Ø 3.4 mm
CAUTION:
Danger of dust in the eyes.
GLASSES OBLIGATION:
Use safety glasses to avoid the
danger of dust in the eyes.
EN