Area On The System Board Where Thermal Interface Materials Are Applied; Remove The Lower Case - Lenovo IdeaPad Slim 5i Hardware Maintenance Manual

Figure 3. Area on the heat sink where thermal interface materials should be applied

Area on the system board where thermal interface materials are applied

The following figure shows the area on the system board where thermal interface materials are applied.
Figure 4. Area on the system board where thermal interface materials are applied

Remove the lower case

Make sure the computer has been shut down before servicing the computer.
Step 1. Place the computer upside down on a flat surface.
Step 2. Remove nine screws.
.
Chapter 4 Removing an FRU or CRU
29