Table of Contents
Advertisement
DJI Dock 2
DJI Matrice 3D Series
/
Safety Guidelines
Before use, read the Safety Guidelines, User Manual, and Maintenance Manual carefully.
Operational Requirements
•
Make sure to perform the maintenance procedure in accordance with the steps in this
manual.
•
Measure the voltage on the contact points of the conductors and make sure there is no risk
of electric shock before touching any conductor surfaces or terminals. The dock must be
powered off before maintenance.
•
In order to avoid an electric shock, DO NOT use any tools that are not insulated, such as a
screwdriver with a bare metal handle.
•
Make sure to wear protective equipment when performing maintenance, such as a safety
helmet, goggles, insulated gloves, and insulated shoes.
•
Make sure the dock is powered off before checking the movable parts of the dock, such as
the fan of the air conditioning system, the dock cover, and the dock cover driving arms to
avoid injury.
•
Before conducting on-site maintenance, make sure that there is no flight plan to be
performed on DJI FlightHub 2 and that the aircraft has landed inside the dock. Make sure
to press the emergency stop button on the dock before any operations. When using the DJI
RC Pro Enterprise remote controller for on site testing, make sure to connect the remote
controller to the dock before releasing the emergency stop button.
Firmware Update and System Calibration
Update the firmware of the dock, the aircraft, and the Intelligent Flight Batteries to the latest
version. If the update fails, restart the device and try again, or use DJI ASSISTANT
Series) to update the firmware. Contact DJI Support if the issue persists. It is recommended to
perform aircraft calibration every six months to keep the aircraft in good condition.
List of Aircraft Calibration:
No.
Tab
1
IMU calibration
2
Compass calibration
3
Gimbal Calibration
• Visit https://enterprise.dji.com/dock-2/downloads and refer to the User Manual and
Maintenance Manual for more information on aircraft calibration.
• Aircraft calibration can be performed using the DJI Pilot 2. Make sure to link the aircraft
to the DJI RC Pro Enterprise remote controller when calibrating the aircraft.
©
6
2024 DJI All Rights Reserved
Maintenance Manual
TM
2 (Enterprise
Advertisement
Table of Contents
Need help?
Do you have a question about the DOCK 2 MATRICE 3D Series and is the answer not in the manual?