Wind Speed Gauge Module And Rainfall Gauge - dji DOCK 2 MATRICE 3D Series Maintenance Manual

2. Make sure that the dock cover rubber seal strip is in good condition and is securely attached
to the dock cover.
3. Make sure that the dock cover propeller bumpers are not damaged or deformed, and the
screws are securely mounted.
2
4. Moisten a soft cloth with clean water or a neutral cleaning solution and clean the dock
covers.
• If any of the mentioned parts are broken or damaged, contact a DJI-authorized service
provider to replace them.
• The dock cover propeller bumpers are wearing parts. Contact a DJI-authorized service
provider and replace them in time when necessary.

Wind Speed Gauge Module and Rainfall Gauge

1. Make sure the glass of the auxiliary lights and the lenses of the security cameras are clean
and not damaged. Moisten a soft cloth with clean water or a neutral cleaning solution to
clean the glass and the lens.
2
2
1
DJI Dock 2 DJI Matrice 3D Series
/
2
1
Maintenance Manual
1. Dock Cover Rubber Seal Strip
2. Dock Cover Propeller Bumpers
1
2
1. Security Camera
2. Auxiliary Light
©
2024 DJI All Rights Reserved 11