Safety Guidelines For Battery Chargers; Before Use; Charging The Battery Pack (See Fig. A); Attaching/Disconnecting The Battery Pack To/From The Appliance - Parkside 302117 Instructions Manual

Safety guidelines for battery chargers

This appliance may be used
■
by children aged 8 years and
above and by persons with lim-
ited physical, sensory or mental
capabilities or lack of experi-
ence and knowledge, provided
that they are under supervision
or have been told how to use
the appliance safely and are
aware of the potential risks. Do
not allow children to use the ap-
pliance as a toy. Cleaning and
user maintenance tasks may not
be carried out by children unless
they are supervised.
To avoid potential risks, dam-
■
aged mains cables should be re-
placed by the manufacturer, their
customer service department or
a similarly qualified person.
The charger is suitable for indoor use
only.
WARNING!
■ To avoid potential risks, damaged mains ca-
bles should be replaced by the manufacturer,
their customer service department or
a similarly qualified person.
│ GB │ IE │ NI │ CY
■ 6

Before use

Charging the battery pack (see fig. A)
CAUTION!
► Always unplug the appliance before you
remove the battery pack from or connect the
battery pack to the charger.
■ Never charge the battery pack if the ambient
temperature is below 10°C or above 40°C.
♦ Connect the battery pack
battery charger
♦ Insert the power plug into the socket. The control
LED lights up red.
♦ The green LED indicates that the charging
process is complete and the battery pack
ready.
CAUTION!
♦ If the red control LED
that the battery pack
cannot be charged.
♦ If the red and green control LEDs
flash, this means that the battery pack
broken.
♦ Push the battery pack
♦ Switch off the charger for at least 15 minutes
between successive charging sessions. Also
disconnect the power plug from the mains
power socket.
Attaching/disconnecting the battery
pack to/from the appliance
Inserting the battery pack:
♦ Push the rotation direction switch
middle position (lock). Allow the battery pack
to click into the handle.
Removing the battery pack:
♦ Press the release button
battery pack.
to the high-speed
(see fig. A).
flashes, this means
has overheated and
both
back into the appliance.
into the
and remove the
PSBSA 20-Li B2
is
is