Table of Contents
Advertisement
Entering Setup Mode
1. Make sure you are in Manual Mode (Mode Key 0
light is off).
2. Touch the key (EE) to the setup contacts (TT). See
Fig. 36.
3. Level 1 appears when Setup Mode is initially
accessed and the Key 2 light turns on. See Fig.
37.
Navigating Within Setup Mode
To go to the next setup level, press key 7.
When key 7 is pressed to change setup levels, the
control will enter the next level while remaining at
the previously active function key.
For example: If you are in setup level 2 and press
key 4, then press key 7 to change to setup level 3,
you will enter level 3 with key 4 being the active
function.
Arrow keys (
) are used to change setup values
or toggle between values where applicable.
Mode Key (0) is inactive while in Setup Mode.
Saving Changes – Exiting Setup Mode
Any number of functions can be accessed and
changed before taking action to save the changes.
To save all changes and exit Setup Mode:
Touch the key (EE) to the setup contacts (TT). See
Fig. 36. The control will retain the new values and
return to Manual Mode.
Setup Mode
EE
Fig. 36
0
Fig. 37
TT
Setup Level
4
2
7
Advertisement
Table of Contents
