Panasonic CF-62 Service Manual page 89

CF-62 |
3.4 Servicing Unit version 2
When replacing a defective Main PCB ver. 2 with ver. 3,
directly connect the lead wires, as shown by "a" in Fig.1. _Be sure that the polarity is correct.
(When directly connecting lead wires, remove the connector attached to
the Mic unit with lead wires enclosed with servicing part DF WV48C00376 or DFWV48C0377.)
3.5 Servicing Unit version 3
When replacing a defective Main PCB ver.3 with an identical unit, | iC78 Main PCB
attach the connector as shown by "a" in Fig. 2.
Main PCB
Black
3.6 After servicing
After installing Mic unit as described in steps 3.4 and 3.5,
attach the two tapes and sponge, as shown in Fig. 2.3.4.
Palm rest cabinet
Approx. 10mm
Rubber
Holder
Printed in Japan
H961201100