Panasonic CF-62 Service Manual page 76

CF-62 |
Carefully insert the tray to the end.
Insert the PD Manual Tool into the slit near the A mark and
slide it in as shown in the diagram. Remove the tool.
Use the PD Manual Tool to turn the screw as far as it will
go in the direction indicated in the diagram.
4%
Replace the Cap 1 and Cap 2 as they were before.
4%
Replace the PD Manual Tool in the FDD Upper Cover as it
was before.
5
Turn the Gear 5 as far as it will go in the direction indicated
in the diagram.
4
Mount the FDD Pack.
If a problem persists, send the computer to the Panasonic
Service Center.