Panasonic CF-62 Service Manual page 71

LCD Module a Ss
(Fig. 43)
Reflection Sheet
Notes When Assembling
Remove the adhesive cover from the Backlight cable
before assembling.
(Fig.
Connector
LCD P.C.B
44)
Cable 1 Connector
LCD P.C.B.
Release the twenty hooks in the direction of
arrow ©, @, ©, @.
Remove the LCD Module in the direction of arrow
@. (Fig. 43)
@E Disconnect the cable 1 in the direction of arrow
©. (Fig. 44)
GE Disconnect the cable 2 in the direction o arrow
@. (Fig. 44)
GED Lift the LCD P.C.B. in the direction of the arrow
@. (Fig. 45)
GP Remove the Backlight Cable from Rib. (Fig. 45-1)
Remove the Backlight Cable. (Fig. 45)
QTE) Open the reflection sheet in the direction of arrow
@. (Fig. 46)
Wap Remove the Backlight in the direction ofarrow @.
(Fig. 46)
Adhesive cover
Backlight Cable
Backlight