Panasonic CF-62 Service Manual page 75

| CF-62
Manually openig the PD Drive (if the PD Drive Tray will not open
or close
If the PD drive tray will no longer open or close because the battery is dead,
or the like, follow the procedure below to open or close the tray manually.
GQ Remove the FDD note:
FDD UPPER COVER Pack (Ref.No.1) | -Donot ship this unit without
closing the keyboard.The
PD Manual Tool——--+# LCD screen and the main
Siijewa Remove the PD unit may be damaged.
Cap 1——| 070 te, | Manual Tool.
Cap 2
: Remove the Cap1 and Cap2.
Use the PD Manual Tool
to turn the screw as far as
it will go in the direction in-
dicated in the diagram.
Use the PD Manual Tool to
turn the screw as far as it will
go in the direction indicated in
the diagram.
insert the PD Manual Tool
into the slit near the 4 mark
and slide it as shown. Re-
move the tool.
Slit
Carefully pull out the ray.
CAUTION:
Applying too much force to the tray could
cause it to break.