Panasonic CF-62 Service Manual page 34

>F-62 |
For 5. U.S.A.. (Fig.3)
Press * and keys. "Note: Press appropriate number according
to the keyboard layout.
®@ Display
KEYBOARD TEST
Press each key character replacement
If correct, press "Y" and "Enter"
If not correct, press "N" and "Enter"
(Normal Message): Keyboard is OK Hit any key when ready._
When an error message is displayed, refer to [6.3 Error Message].
For 6. SCAN CODE RETURN TEST. (Fig.2)
Press (6) and keys.
Immediately after this message is displayed,
press the key of the test you would like to
perform.
(The routine will terminate if no entry is pressed.)
® Display
KEYBOARD RETURN CODE TEST
Press any key.
(Normal message) : KEY Key has been hit or broken (F10)
SCAN code : xx
Test done ! | Hit any key when ready._
When an error message is displayed, refer to [6.3 Error Massage].
4) TOUCH PAD
Fig.1 displayed.
Press and keys.
@ Display
Touch PadiMouse test 1 The cursor moves over the screen according to
Left button
orTapped OF Ee
*2 Clicking the button or quickly tapping the pad
Right button OFF. twice quickly switches the display to "ON".
Is this correct ? (Y/N)
the movement of your finger tip over the work surface.