Panasonic CF-62 Service Manual page 56

CF-62
SCSI Test
SCSI controller test
ASPI Manager not installed. (F32)
Please confirm your CONFIG.SYS file.
ASPI: SCS! command aborted. (F32)
ASPI: SCSI command is failed. (F32)
ASPI: SCS! command is invalid. (F32)
ASPI: Invalid SCSI Adapter number (F32)
ASPI: No SCS! Adapter. Status = (xxH) (F32)
ASPI: No SCS! Command Executed (F32)
ASPI: Invalid ASP! Status (xxH) (F32)
(TARGET is busy)
SENSE DATA
XK XX XK XK KK XK XK XK KOK XK XK HK XK XK XK KK
XK XK XK XK XK XK XK XK KK XK XK XK XK XK XK XK
ASPI Manager not installed. (F32)
Please confirm your CONFIG.SYS file.
ASPI: SCSI command aborted. (F32)
ASPI: SCSI command is failed. (F32)
ASPI: SCSI command is invalid. (F32)
ASPI: invalid SCSI Adapter number (F32)
ASPI: No SCSI Adapter. Status = (xxH) (F32)
ASPI: No SCSI Command Executed (F32)
ASPI: Invalid ASPI Status (xxH) (F32)
(TARGET is busy)
SENSE DATA
MK XK XK XK KK XK XK XK XK XK XK XK XK XK XK XK
XX XK XK XK XK XK XK XK XK XK XK XK XK XK XK XK
ASPi Manager is not installed. (F32)
Please confirm your CONFIG.SYS file.
No CD-ROM drive found. (F32)
Invalid CD-ROM or no CD-ROM. (F32)
Infrared Communication Port Test
Controller register r/w test Infrared port failed. (F80) Main P.C.B.
Internal loopback test Transmitted data = xxH, Received data = yyH
Infrared port loopback test failed. (F80)
Transmitted data = xxbytes, Received data = yybytes
infrared port loopback test failed. (F80)
Main P.C.B. or
PD Drive or
PD Media
CD-ROM test
Main P.C.B. or
CD Media
PC CARD controller Test
Sound register test SOUND REGISTER R/AW ERROR! ! Main P.C.B. 7-10
Battery Test
Overcharged (F10)
Battery Overdischarged (F10)
Battery Cell balance error (F10)
Battery Switching error (F10)
Battery Temperature is out of range (F10)
Main P.C.B. — or
Power P.C.B. or
Battery Pack
Battery Exceed maximum charging amount (F10)
Battery Exceed maximum charging time (F10)
Battery Serial communication error (F10)
Battery Charging current does not decrease (F10)
Battery No response from battery (F10)
Charging current error (F10)