Panasonic CF-62 Service Manual page 15

CF-62
.
5.3 Diagnosis Map
Wi Startup Error Code
Troubleshooting procedure Source of problem | Ref.Page
062 : oe ;
Default configuration in use} 1-1 Configuration
101 jInterrupt controller failure | 2- Main P.C.B.
102 {External ROM checksum Docking unit or Bus
error 3-1
106 |Diskette controller failure | 4-1
114
Check configuration
connectors or ce
Expansion card
YES {Go to No. 5-2
NO {Main P.C.B. or
Bus connectors or
7-10
7-10
Adapter ROM checksum
error
5.4 Does the system return to normal
if the expansion card is removed?
7
= oO
CPU P.C.B.
_y {Replace the expansion card. YES |Expansion card ——
Does operation return to normal? | NO |Main P.C.B
wn NO
~
~ aj;O
— |
151 |Real Time Clock failure [6-1 [| ———————-_ | Main P.C.B. -
7 | 161 |Dead RTC Battery _, |Does resetting through SETUP ES jError during SETUP Saar?
correct the problem? Main P.C.B. 7-10
162 {Configuration error 8-1 |Check configuration. Configuration
CMOS Checksum error a4 Were the correct settings selected] YES |Go to No. 9-2 —-
during SETUP? Go to No. 9-4 eeeaies
"J
—
zi x
O]
= o NO
co
© NO
<
m
"
_ » [Replace the FDD. YES |FDD 7-2,7-14
Does operation return to normal? | NO {Go to No. 9-3 —
3 Replace the HDD. HDD 7-2,7-14
Does operation return to normal? | NO |Go to No. 9-4 —
9-4 Does resetting through SETUP ES jError during SETUP ——=
correct the problem? Main P.C.B. 7-10
0-1 Does resetting the date/time in ES {Error during SETUP ——
SETUP correct the problem? Main P.C.B. | 7-40
4 (Flash ROM BIOS is
updated)
2-4 Does resetting through SETUP
correct the problem?
See "Beep Error
Code" No.1
Replace the expansion RAM
Expansion RAM card
card.
Does} NO
{Main P.C.B. or
7-10
operation return to normal? (Go
to "NO" if not connected.)
oO
—_
163 |Real time Clock is not
updating
173 |ROM configuration
changed
177 |Password is corrupted.
(CMOS RAM is broken)
Memory size/data error
— —_
=
z\<|zix
Ol wm|Ola
N oO
—
= = ox — ao
No = oO