Panasonic CF-62 Service Manual page 50

CF-62 |
For 5. SCS! CONTROLLER TEST. (Fig.14)
Press (5) and keys.
@ Display
SCSI CONTROLLER TEST
ASPI|: SCSI command is in progress
ASPI: SCSI command complete successfully
HOST STATUS =00
TARGET STATUS = 00
(Normal Message): Test done ! ! Hit any key when ready._
When an error message is displayed, refer to [6.3 Error Message].
For 6. PD DRIVE TEST. (Fig.14)
Insert the PD disk into the PD drive.
Press (6) and keys.
@ Display
PD DRIVE TEST
Number of HOST Adapter(s) = 1
Target ID of HOST Adapter = 7
SCSI Manager ID = "AMD ASPIMGR X.XX"
HOST Adapter ID = "AMD PC scsi PCI"
Searching PD Drive.
SCSI ID = 0...Found PD Drive.
XXXXXXXXXXXXXXXXXXXXXX Warning! | XXxXxXXXXXXXXXXXXXAXXXXXXX
CONTENTS OF PD DISK WILL BE DESTROYED
XXXXXXXXXXXXXXXXXXXXXX Waring! | |XXXXXXXXXXXXXXXXXXXXXXXX
Insert PD disk into a PD drive
Hit any key when ready_
Press any key.
@ Display
PD DRIVE TEST
Writing PD address = xxxxxxxxH
ASPI: SCSI command is in progress
ASPI: SCSI command complete successfully
HOST STATUS = 00
TARGET STATUS =00
Reading PD Address = xxxxxxxxH
ASPI: SCSI command is in progress
ASPI: SCSI command complete successfully
HOST STATUS = 00
TARGET STATUS =00
(Normal Message): Test done ! ! Hit any key when ready._
When an error message is displayed, refer to [6.3 Error Message].