Table of Contents
Advertisement
Carefully grab the edges or sides of the microSD card and
gently pull it out.
J7 - Alternate Power and communication
The UEZGUI-4357-50WVN-BA includes an alternate power and communication header. This header provides
access to UART 3, I2C Channel 1, SPI Channel 0, GPIO, Counter/Timer Input/Output, as well as a 5V power input.
This connector is a 1.25mm Hirose male, shrouded connector. The Hirose Part Number is: DF13A-10P-1.25H (20)
(Digikey PN: H3375-ND). Refer to the schematic for specific connectivity.
Pin Number
1
2
3
4
5
Note (1) – this signal is not GPIO capable
3/27/2024
µ E Z G U I U s e r ' s M a n u a l
At this point the microSD card is fully removed from the
socket.
Description
GPIO4.13/MISO0
GPIO4.14/MOSI0
(1)
SSP0SCK
5V Input
5V Input
Copyright ©2024, Future Designs, Inc.
Pin Number
6
7
8
GPIO5.4/RXD3/SCL1/CTIN0
9
GPIO5.3/TXD3/SDA1/CTIN0
10
GPIO2.4/DAC/CTOUT2
P a g e
| 20
Description
Ground
Ground
Revision 1.4
Advertisement
Table of Contents
