Table of Contents
Advertisement
8. Setting up a Slideshow
We have created a document and included tools for creating your own slideshows for EZ GUI units. Production
module units require 24-bit uncompressed Targa (.TGA) format for all images. Development kit units require bitmap
(.BMP) format for all slideshow images.
https://www.teamfdi.com/wp-content/uploads/Converting-a-PowerPoint-Slideshow-for-use-on-uEZGUI-Products-
.zip
This guide also covers making speaker notes that can play alongside your slides.
9. Setting up a Video
Suggested procedures on creating videos for playback using the µEZ video player provided in µEZ v2.13.100 (and
later) on supported µEZ GUI hardware, is available in the FDI Video Creation Guide (included in uEZ). This guide also
suggests basic procedures for downloading videos from YouTube. This guide assumes that a source video is available
in AVI uncompressed format with a resolution of 480×272 or greater.
For this uEZGUI up to 800x480 full-screen video running at 8 FPS is supported from the microSD card. For lower
resolutions, 15-24 FPS video is typically supported. A lower resolution video can be displayed on a white or black
screen or even a background frame, so for example a 20 FPS boot-up animated logo could be played centered on a
black background.
10. µEZ Doxygen online HTML documentation
μEZ has built-in comment documentation that follows the Doxygen comment standard. This standard writes code
comments and annotations in a certain manner so that it is compiled along with source code into HTML
documentation.
FDI provides pre-compiled HTML documentation at this link:
In the µEZ source code, "uEZ/uEZDoxyfile" is the main project file for the Doxygen generator. When Doxygen is
recompiled, the new Doxygen files will be found here: uEZ\Docs\ Doxygen_Documentation.html
FDI updates the documentation periodically. We recommend reviewing your device for updates to the
documentation as you learn a new μEZ® release or drivers are added to the system.
For more information, see the Doxygen website:
11. µEZ Bootloader
The uEZ bootloader allows users to install their own applications without the need for special tools like J-Link. All that
is needed is an SD card or USB drive. The bootloader consists of two primary components: The Base Bootloader
(BBL), which contains a base set of functions and never changes, and the Application Bootloader (ABL) that contains
the intelligence needed to program internal and external flash memory and can be updated dynamically since it is
loaded from local memory such as an SD card or USB drive.
3/27/2024
µ E Z G U I U s e r ' s M a n u a l
https://www.teamfdi.com/uez/docs/
https://www.stack.nl/~dimitri/doxygen/
Copyright ©2024, Future Designs, Inc.
P a g e
| 7
Revision 1.4
Advertisement
Table of Contents
