Advertisement
5.0" PCAP Touch Screen LCD GUI
Development Kit
Congratulations on the purchase of your μEZ® GUI development kit!
Our goal is to ensure you have a pleasant experience familiarizing
yourself with the functions and capabilities of our products.
To Begin Development with your μEZ GUI:
1. Power on the device by connecting the 5V power adapter to
one end of the USB cable and the other end to the μEZ GUI
P2. Note: Do not connect the μEZ GUI to a computer USB
port. Standard USB 2.0/3.0 ports will not provide sufficient
power to the device.
TeamFDI.com/StartHere
2. Visit
UEZGUI-4357-50WVN Start Here Guide. This guide will
provide step-by-step instructions and supporting files for
designing your first graphical user interface.
FDI
to download the
Future Designs, Inc.
Advertisement
Table of Contents
Related Manuals for FDI UEZGUI-4357-50WVN
Summary of Contents for FDI UEZGUI-4357-50WVN
- Page 1 Standard USB 2.0/3.0 ports will not provide sufficient power to the device. TeamFDI.com/StartHere 2. Visit to download the UEZGUI-4357-50WVN Start Here Guide. This guide will provide step-by-step instructions and supporting files for designing your first graphical user interface. Future Designs, Inc.
- Page 2 UEZGUI-4357-50WVN Kit Contents • 5.0” PCAP Touch Screen LCD GUI Production Module (Part number: UEZGUI-4357-50WVN-BA) • SEGGER J-Link Lite Cortex-M JTAG Debugger • 9 Pin Samtec Cable • (2) USB Type A to USB Type Mini-B USB Cables • Universal A/C to 5V USB Power Supply Also Included: •...
Need help?
Do you have a question about the UEZGUI-4357-50WVN and is the answer not in the manual?
Questions and answers