Table of Contents
Advertisement
16. Configuring Rowley CrossWorks for ARM® for J-Link Flashing
1) See the document "uEZ® Software Quick Start Guide" for details on how to download the µEZ® source code and
setup the Rowley CrossWorks compiler.
(https://www.teamfdi.com/products/uez/manual/MA00015%20uEZ%20Software%20Quickstart%20Guide.pdf)
software quick start guide
2) Plug in the J-Link device into the PC and install any drivers as directed. The SEGGER J-Link drivers can be found
at
https://www.SEGGER.com/cms/jlink-software.html
https://www.SEGGER.com/cms/development-tools.html.
3) Plug in the J-Link's JTAG connector to the µEZ GUI board at J1 with the JTAG adapter.
4) Select Target menu and choose Connect. The following list will appear to the right.
5) Click on "SEGGER J-Link".
3/27/2024
µ E Z G U I U s e r ' s M a n u a l
with additional information at
Copyright ©2024, Future Designs, Inc.
P a g e
| 13
Revision 1.4
Advertisement
Table of Contents
