Table of Contents
Advertisement
Quick Links
µEZ® GUI User's Manual
Covers the following products:
UEZGUI-4357-70WVN (Dev Kit)
UEZGUI-4357-70WVN-BA (Board Assembly)
Example Display Images
shown for Reference Only
NOTICE: At FDI we are constantly improving our documentation. Please get the latest version of this
document in the documentation tab of the product page at www.TeamFDI.com
Copyright ©2023, Future Designs, Inc., All Rights Reserved
Advertisement
Table of Contents
Related Manuals for FDI UEZGUI-4357-70WVN
Summary of Contents for FDI UEZGUI-4357-70WVN
- Page 1 Example Display Images shown for Reference Only NOTICE: At FDI we are constantly improving our documentation. Please get the latest version of this document in the documentation tab of the product page at www.TeamFDI.com Copyright ©2023, Future Designs, Inc., All Rights Reserved...
-
Page 2: Table Of Contents
µ E Z G U I U s e r ’ s M a n u a l P a g e Table of Contents Introduction _______________________________________________________________________ 3 Block Diagram ______________________________________________________________________ 3 Kit Contents for FDI PN: UEZGUI-4357-70WVN ____________________________________________ 3 Useful links ________________________________________________________________________ 4 Functional Description _______________________________________________________________ 4 Startup procedure __________________________________________________________________ 4 Demonstration Software _____________________________________________________________ 5... - Page 3 Information in this document is provided solely to enable the use of Future Designs products. FDI assumes no liability whatsoever, including infringement of any patent or copyright. FDI reserves the right to make changes to these specifications at any time, without notice. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of Future Designs, Inc.
-
Page 4: Introduction
Graphical User Interface (GUI) based design by providing the basic functions necessary for most customer products. 2. Block Diagram Figure 1 – UEZGUI-4357-70WVN-BA Block Diagram 3. Kit Contents for FDI PN: UEZGUI-4357-70WVN • UEZGUI-4357-70WVN-BA module with 7.0” Capacitive Touch Screen LCD • SEGGER J-Link Lite Cortex-M Debug Probe o 9 Pin Ribbon Cable (Keyed) •... -
Page 5: Useful Links
µ E Z G U I U s e r ’ s M a n u a l P a g e 4. Useful links Complete Users Manuals, Schematics, and documentation are available on the Micro-SD card provided with the µEZ GUI and are also available from the following websites (please refer to the websites for the latest updates): •... -
Page 6: Demonstration Software
µ E Z G U I U s e r ’ s M a n u a l P a g e At this point the unit is ready for software demonstrations and user operation. 7. Demonstration Software Note: The Demonstration Software is subject to change at any time. The following software demonstrations are available from the Main Menu: Example Applications –... -
Page 7: B) Uez Demo
µ E Z G U I U s e r ’ s M a n u a l P a g e • Temp Graph The temp graph demonstrates the use of emWin and interfacing with the on-board temperature sensor and real time clock (RTC) to draw a graph of the device’s temperature and the humidity level within the room, as well as show the time and date. -
Page 8: Setting Up A Slideshow
Suggested procedures on creating videos for playback using the µEZ video player provided in µEZ v2.05 (and later) on supported µEZ GUI hardware, is available in the FDI Video Creation Guide (link below). This guide also suggests basic procedures for downloading videos from YouTube. -
Page 9: Μez Project Maker
12. µEZ Project Maker FDI has provided a project maker to help create new projects for EZ GUI hardware. It is available for download at http://sourceforge.net/projects/uez/. -
Page 10: Configuring Micro Sd Card For High Clock Frequency
The LPC4357 can run the High-Speed SD Card Interface at a much higher speed, and the software is configured by default to do so. The cards should be of good quality and have at least a class 10 rating. Below are some examples of cards that FDI has tested and qualified. •... - Page 11 µ E Z G U I U s e r ’ s M a n u a l P a g e | 10 SD Card Formatting For the best results the SD card should be formatted in a particular way, this is especially important when playing videos from the unit.
- Page 12 9. Before Clicking <OK> in the warning dialog box be sure the card does not have importuning information on it. 10. Click <OK> on the format complete dialog box. The SD Card is now ready for use with the uEZGUI-4357-70WVN. 9/13/2023 Revision 1.2...
-
Page 13: Configuring Rowley Crossworks For Arm® For J-Link Flashing
µ E Z G U I U s e r ’ s M a n u a l P a g e | 12 15. Configuring Rowley CrossWorks for ARM® for J-Link Flashing 1) See the document “uEZ® Software Quick Start Guide” for details on how to download the µEZ® source code and setup the Rowley CrossWorks compiler. - Page 14 µ E Z G U I U s e r ’ s M a n u a l P a g e | 13 6) Open the Targets view by clicking Target > Targets 7) Right click on SEGGER J-Link and select Properties. 9/13/2023 Revision 1.2 Copyright ©2023, Future Designs, Inc.
-
Page 15: Configuring Iar Ewarm V9.30.1 For J-Link Flashing
µ E Z G U I U s e r ’ s M a n u a l P a g e | 14 8) If programming a blank LPC4357 part, select a Speed of 100 kHz. If the part has already been programmed, select a Speed of 1000 kHz. -
Page 16: Board Layout
µ E Z G U I U s e r ’ s M a n u a l P a g e | 15 17. Board Layout The following figure illustrates the layout of the various components of the UEZGUI-4357-70WVN kit. They are for reference only and are subject to change. 9/13/2023 Revision 1.2... -
Page 17: I/O Connector Descriptions
18. I/O Connector Descriptions J1 - JTAG Connector The UEZGUI-4357-70WVN-BA uses a reduced size JTAG connector based on a 0.050” Header. This smaller connector provides 100% of the functionality of the standard 20-pin JTAG connector but utilizes 70% less board space. -
Page 18: J3 - Microsd Socket
J3 - MicroSD Socket When connected to the USB Host port on a PC, the UEZGUI-4357-70WVN-BA will appear as a USB Flash Drive to the PC, allowing the user to read and write files directly to the MicroSD card. The unit uses a MicroSD Socket for flexible mass storage capability. - Page 19 µ E Z G U I U s e r ’ s M a n u a l P a g e | 18 Pin Number Description Micro SD DAT2 Micro SD DAT3 Micro SD CMD 3.3V Micro SD SCLK Ground Micro SD DAT0 Micro SD DAT1...
-
Page 20: J7 - Alternate Power And Communication
J7 - Alternate Power and communication The UEZGUI-4357-70WVN-BA includes an alternate power and communication header. This header provides access to UART 3, I2C Channel 1, SPI Channel 0, GPIO, Counter/Timer Input/Output, as well as a 5V power input. This connector is a 1.25mm Hirose male, shrouded connector. The Hirose Part Number is: DF13A-10P-1.25H (20) (Digikey PN: H3375-ND). -
Page 21: J11 - Pmod Type 2A Connector
µ E Z G U I U s e r ’ s M a n u a l P a g e | 20 J11 - PMOD Type 2A Connector The UEZGUI-4357-70WVN-BA includes a PMOD Type 2A (SPI) connection to an expansion board. Refer to the schematic for specific connectivity. Pin Number Description... -
Page 22: P1 - Usb Mini-Ab Port And Usb Power Input 5Vdc
P1 – USB mini-AB port and USB Power Input 5VDC The UEZGUI-4357-70WVN-BA has a mini-AB USB connector for host or device mode. By using a USB OTG adapter (with a Mini-A plug) it will short the ID pin 4 to ground. This can be used for host mode detection in the application. -
Page 23: J5 & J6 - Expansion Connectors
| 22 J5 & J6 - Expansion Connectors The UEZGUI-4357-70WVN-BA includes two expansion connectors that provide a wide variety of capabilities for user expansion, ranging from 10/100 Ethernet to USB Host, etc. Please Note: When using I/O signals on the µEZ GUI Expansion Connectors (J5 &... - Page 24 µ E Z G U I U s e r ’ s M a n u a l P a g e | 23 Pin Name Pin Description RXD1 – UART Channel 1 Receive Data GPIO6.12 – General Purpose I/O GPIO6.12/TXD1 TXD1 –...
- Page 25 µ E Z G U I U s e r ’ s M a n u a l P a g e | 24 Pin Name Pin Description CAN1_TD – CAN Channel 1 Transmit Data GPIO6.0 – General Purpose I/O ENET_MDC –...
-
Page 26: J5 & J6 - Expansion Connector Cable Details
µ E Z G U I U s e r ’ s M a n u a l P a g e | 25 J5 Signal Details Pin Name Pin Description Ground (GND) Power GPIO6.30 – General Purpose I/O GPIO6.30/CTOUT12 CTOUT12 –... - Page 27 µ E Z G U I U s e r ’ s M a n u a l P a g e | 26 Ethernet, high-speed IO, 3” recommended maximum, 4” absolute maximum The following table provides example part numbers for the expansion cables: Description MFGPN Digi-Key PN...
-
Page 28: Schematics, Documentation, And Support
UEZGUI-4357-70WVN-BA with LCD: -20°C to +70°C 21. ESD Warning The UEZGUI-4357-70WVN-BA kit is shipped in a protective anti-static package. The kit must not be subjected to high electrostatic potential. Damage may occur to the boards that will not be covered under warranty. General practice for working with static sensitive devices should be followed when working with the kit. -
Page 29: Mechanical Details
µEZ GUI unit. • The UEZGUI-4357-70WVN may also optionally be powered via the following connectors; o Alternate Power/Communication Connector, J7, with a maximum of 2A 5V input o Expansion Connector(s) J5 and/or J6 – refer to the expansion connector section for details 24. - Page 30 µ E Z G U I U s e r ’ s M a n u a l P a g e | 29 Figure 5 –Mechanical Dimensions (Component View) Figure –Mechanical Dimensions (LCD Module View and Side View) 9/13/2023 Revision 1.2 Copyright ©2023, Future Designs, Inc.
Need help?
Do you have a question about the UEZGUI-4357-70WVN and is the answer not in the manual?
Questions and answers