Mitsubishi Electric FR-E800-HVC Series Instruction Manual page 9

CAUTION
Emergency stop
• A safety backup such as an emergency brake must be provided for devices or equipment in a system to prevent
hazardous conditions in case of failure of this product or an external device controlling this product.
• If the breaker installed on the input side of this product trips, check for wiring faults (such as short circuits) and damage
to internal parts of this product. Identify and remove the cause of the trip before resetting the tripped breaker (or before
applying the power to this product again).
• When any protective function is activated, take an appropriate corrective action before resetting this product to resume
the operation.
Maintenance, inspection and parts replacement
• Do not carry out a megger (insulation resistance) test on the control circuit of this product. Doing so will cause failure.
Disposal
• This product must be treated as industrial waste.
General instruction
• For clarity, illustrations in this Instruction Manual may be drawn with covers or safety guards removed. Ensure all covers
and safety guards are properly installed prior to starting operation. For details on the PM motor, refer to the Instruction
Manual of the PM motor.
8