Mitsubishi Electric FR-E800-HVC Series Instruction Manual page 28

 Removal of the front cover
• Example of FR-E820-0011(0.2K)
(a)
Loosen Loosen Loosen
Front cover Front cover Front cover
(a)
Loosen the screw on the front cover. (The screw cannot be removed.)
(b) Put a finger on the recess for the screw of the front cover and pull out the cover.
(c) With the front cover removed, the control circuit terminals (connector) can be wired.
 Reinstallation of the front cover
• Example of FR-E820-0011(0.2K)
(a)
(a) Reinstall the front cover to the inverter.
(b) Tighten the mounting screw of the front cover. (Tightening torque: 0.6 to 0.8 N·m)
NOTE
• Fully make sure that the front cover has been reinstalled securely. Always tighten the installation screws of the front cover.
(b)
(b)
(c)
Tighten Tighten Tighten
2. Installation and Wiring
2.2 Removal and reinstallation of the front cover
1
2
3
4
5
6
7
8
9
10
27