Table of Contents
Advertisement
GENERAL MAINTENANCE
WHEELS
Wheel Removal & Installation
To remove the wheels from your UTV, follow this procedure:
1. Elevate the UTV so the wheel comes off the ground by using a
suitable jack and support stands
2. Remove the nuts from the wheel
3. Remove the wheel assembly
To install the wheels on your UTV, follow this procedure:
1. Place the wheel on the spindle
2. Install the nuts on the spindl's studs so the tapered side of the
nut
faces the wheel
OK
WRONG
3. Tighten the wheel nuts in a criss cross pattern
4. Torque the nuts to the specified torque
Wheel Nut torque ..................... 40 lb-ft (55 N-m)
74
■NOTE: The arrow mark
on
the tire must point towards
the rotating direction of the
wheel.
POTENTIAL HAZARD
Install the wheels improperly.
WHAT CAN HAPPEN
A wheel may come loose, possibly leading to an
accident.
HOW TO AVOID THIS HAZARD
Carefully follow the instructions in this Owner's
Manual when installing the wheels.
TIRES
Always use the size and type of tires specified for your
KYMCO UTV. Refer to the specifications chart in this
manual for tire-related information and always maintain
proper tire inflation pressure.
Advertisement
Table of Contents
