Table of Contents
Advertisement
ACTIVE DRIVING
RAKING / STOPPING
Always allow plenty of room and time to stop your UXV450i safely.
Be alert and prepared, as quick stops are inevitable. Whether you
are stopping slowly or stopping quickly, follow these braking
guideline.
1. Press down on the brake pedal with your foot to apply the
brakes
2. If your wheels lock, release the brake pedal for a second, then
apply the brakes again.
3. Avoid prolonged application of the brakes. Even maintaining
minimal pressure on the brake pedal will cause the brake pads to
drag on the brake rotor and may cause overheating of the brake
fluid.
Prolonged and repetitive use of the vehicle's hydraulic brakes for
high speed stops will cause overheating of the brake fluid and
premature brake pad wear which can cause unexpected loss of
braking ability.
Use only KYMCO approved brake fluid. Never substitute or mix
different types or grades of brake fluid, as unexpected loss of
braking ability can result. Check the vehicle's brake fluid level and
pad wear before each use. The loss of braking ability may result
in severe injury or even death.
34
SHIFTING
This KYMCO Side-by-Side vehicle is equipped with an automatic,
dual-range transmission with reverse capability. To shift your
UXV450i into gear or reverse, follow these steps:
LOW range
HIGH range
Neutral
Reverse
Parking
1. To engage the HIGH range from neutral, move the shift lever
forward.
■ NOTE: The HIGH range is for normal driving with light loads.
2. To engage the LOW range from HIGH range, move the shift
lever outward and forward.
■ NOTE: The LOW range is for carrying heavy loads or trailer
towing. Compared to HIGH range, the LOW range position
provides slower speed and greater torque to the wheels.
Advertisement
Table of Contents
