Parking Brake - KYMCO UXV450i 2023 Manual

FEATURES & CONTROLS
■NOTE: Always turn off the engine, place the transmission in gear
and engage the parking brake whenever you leave the
UTV unattended.
■NOTE:Maintaining proper gear sift linkage adjustment is
required for proper transmission function. Contact your
KYMCO dealer if you experience any shifting difficulty.

PARKING BRAKE

Your KYMCO UTV is equipped with a hand-operated parking
brake. When engaged the parking brake will lock all four wheels
on the vehicle.
Engaging the Parking Brake
To engage the parking brake, turn the handle
Use the following procedure to verify that the parking brake has
locked the wheels when engaged:
1. Pull the parking brake handle outward until it stops and locks
in place
2. Attempt to push the UTV
■NOTE: The parking brake must lock the UTV's wheels. If it
does not, take your UXV450i to an authorized KYMCO
dealer for service.
Releasing the Parking Brake
To release the parking brake, turn the handle
Always make sure that the parking brake has been disengaged
before operating your UTV. An accident can result if the parking
brake is left engaged while the UTV is driven. Never rely on the
parking brake as the sole means of se- curing the UTV when
parking on a hill. Always block the downhill side of the UTV's
wheels or park the UTV per-pendicular to the hillside.
54
left.
right.

(Parking Brake engaged)

(Parking Brake released)