Table of Contents
Advertisement
2100F12 User Manual
To synchronize the time with the network, perform the following steps:
1. Choose System > Date & Time.
2. Select Sync from network.
3. From the Primary NTP server drop-down list, select a server as the primary server for time
synchronization.
4. From the Secondary NTP server drop-down list, select a server as the IP address of the secondary
server for time synchronization.
5. If you don't want to use other NTP server, you need to enable Optional ntp server, and set a
server IP address.
6. Set Time zone.
7. Click Submit. As shown in Figure 5-78.
To set DST, perform the following steps:
1.
Choose System>Date&Time.
2.
Set DST enable.
3.
Set Start Time and End Time.
4.
Click Submit. As shown in Figure 5-79.
55
Advertisement
Table of Contents
