2100F12 User Manual
5.6.10 DoS
On this page, you can enable or disable the Denial of service (DoS) function.
1.
Choose Firewall > DoS.
Set UPnP to Enable.
2.
3.
Click Submit. As shown in Figure 5-66.
5.7 VPN
This function enables you to connect the virtual private network (VPN).
To connect the VPN, perform the following steps:
1.
Choose VPN.
2.
In the VPN Settings area, enable VPN.
3.
Select a protocol from Protocol drop-down list.
Enter Username and Password.
4.
Click Submit.
5.
You can view the status in VPN Status area. As shown in Figure 5-67.
6.
48