Table of Contents
Advertisement
2100F12 User Manual
5.6.4.5 Adding IP Filtering rule
Add an IP address filtering rule, perform the following steps:
Choose Firewall>IP Filtering.
1.
Click Add list.
2.
Set Service.
3.
Set Protocol.
4.
In the Source IP Address Range box, enter the source IP address or IP address segment to
5.
be filtered.
6.
In the Source port range box, enter the source port or port segment to be filtered.
7.
In the Destination IP Address Range box, enter the destination IP address or IP address
segment to be filtered.
8.
In the Destination port Range box, enter the destination port or port segment to be
filtered.
9.
In the Status box, choose a status the rule will be
10. Click Submit. As shown in Figure 5-48.
5.6.4.6 Modifying IP Filtering rule
To modify an IP filtering rule, perform the following steps:
Choose Firewall > IP Filtering.
1.
2.
Choose the rule to be modified, and click Edit.
3.
Repeat steps 3 through 9 in the previous procedure.
4.
Click Submit. As shown in Figure 5-49.
executed.
39
Advertisement
Table of Contents
