Table of Contents
Advertisement
2100F12 User Manual
5.6.8.1 Add Access Restriction
To add an access restriction rule, perform the following steps:
1.
Choose Security>Access Restriction.
2.
Click Add list.
3.
Set Access Restriction to Enable.
4.
Set Access Restriction Name.
5.
Set Device MAC address or IP address.
Set Weekdays and time.
6.
Click Submit.
7.
5.6.8.2 Modify Access Restriction
To modify a access restriction rule, perform the following steps:
Choose Security>Access Restriction.
1.
2.
Choose the item to be modified, and click Edit.
3.
Repeat steps 4 through 6 in the previous procedure.
4.
Click Submit.
5.6.8.3 Delete Access Restriction
To delete a access restriction rule, perform the following steps:
1.
Choose Security>Access Restriction.
2.
Choose the item to be deleted, and click Delete.
5.6.9 UPnP
On this page, you can enable or disable the Universal Plug and Play (UPnP) function.
To enable UPnP, perform the following steps:
1. Choose Firewall > UPnP.
2. Set UPnP to Enable.
3. Click Submit. As shown in Figure 5-65.
47
Advertisement
Table of Contents
