Table of Contents
Advertisement
2100F12 User Manual
3.
(Optional) Set ICMP Redirect to Enable.
4.
Set Host address.
This IP address must be different from the IP address set on the LAN Host
Settings page, but they must be on the same network segment.
5.
Click Submit. As shown in Figure 5-18.
5.2.10 Static Route
5.6.2.15 5.2.10.1 Add Static Route
To add a static route, perform the following steps:
1.
Choose Network Setting>Static Route.
2.
Click Add list.
3.
Set the Dest IP address and Subnet mask.
4.
Select an Interface from the drop-down list.
5.
If you select LAN as the interface, you need set a Gateway.
6.
Click Submit. As shown in Figure 5-19.
5.6.2.16 5.2.10.2 Modify Static Route
To modify an access restriction rule, perform the following steps:
1.
Choose Firewall>Static Route.
30
Advertisement
Table of Contents
