Table of Contents
Advertisement
2100F12 User Manual
4.
In the APN Setting area you can set the APN parameters, such as enable or disable the apn,
apn name, profile name.
5.
Set the authentication type (chap or pap or none) and the username, password of it.
6.
Set the PDN type: IPv4 or IPv6 or IPv4/v6 dual stack.
7.
Click Submit. As shown in Figure 5-13.
If you want set an APN as default gateway, you should check that is enabled.
And we can also set the APN apply to SNMP or TR069.
5.2.6 PIN Management
To manage the PIN, you can perform the following operations on the PIN Management page:
Enable or disable the PIN verification.
Verify the PIN.
Change the PIN.
Set automatic verification of the PIN. As shown in Figure 5-14
25
Advertisement
Table of Contents
