Table of Contents
Advertisement
2100F12 User Manual
5.2.8 LAN Setting
5.6.2.13 5.2.8.1 Setting LAN Host Parameters
By default, the IP address is 192.168.0.1 with a subnet mask of 255.255.255.0. You can change the
host IP address to another individual IP address that is easy to remember. Make sure that IP
address is unique on your network. If you change the IP address of the CPE, you need to access
the web management page with the new IP address.
To change the IP address of the CPE, perform the following steps:
1.
Choose Network>LAN Settings.
2.
In the LAN Host Settings area, set IP address and subnet mask.
3.
In the DHCP Setting area, set the DHCP server to Enable.
4.
Click Submit. As shown in Figure 5-16.
28
Advertisement
Table of Contents
