Huawei LUNA2000-2.0MWH Series User Manual page 239

LUNA2000-2.0MWH Series Smart String ESS
User Manual
● Ensure that the painting is thin, even, and smooth.
● In the case that an equipment pattern has different colors, to prevent
Figure D-3 Repainting a damaged area
Step 5 Wait for 30 minutes and check whether the painting meets the requirements.
----End
Paint Supply Information
Table D-2 Paint requirements
Item
Primer thickness
Intermediate coat thickness
Top coat thickness
Primer type
Intermediate coat type
Issue 15 (2023-11-01)
NO TICE
undamaged areas and those with different colors as the damaged area from
being contaminated during repainting, cover such areas using white paper and
adhesive tape before repairing paint.
NO TE
● The color of the repainted area must be consistent with that of the surrounding area.
Use a colorimeter to measure the color difference, which should be less than or equal to
3 (ΔE ≤ 3). If a colorimeter is unavailable, ensure that there is no visible edge between
the repainted area and the surrounding area. The paint should be free of bulges,
scratches, flaking, or cracks.
● If you choose to spray paint, it is recommended that you spray paint three times before
checking the result. If the color does not meet the requirements, paint more times until
the painting meets the requirements.
Copyright © Huawei Technologies Co., Ltd.
D How Do I Repair Paint Damage?
Requirement
60 μm
120 μm
60 μm
Epoxy zinc-rich paint
Zinc-rich paint
228